> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.uplisting.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# The compliance document vault

# **The compliance document vault**
The vault keeps your property certificates and agreements in one place, reads the dates off them, reminds you before they expire, and shows you which listings are short of something. You can access the [__**Compliance**__](https://app.uplisting.io/compliance) setting from the sidebar of your Uplisting calendar

**Compliance** access is a permission like any other, changed on the **Roles** tab in **Team Hub.** Clients, housekeepers and maintenance teammates do not have access to this setting, meaning those Roles cannot open your certificates. See \[[How permissions work](https://support.uplisting.io/en/article/how-permissions-work-1rjmhli/)].
| ⚠️ **Important: what the vault does and does not do.** Uplisting keeps your documents in one place and reads the dates off them. We do not check that a document is valid, sufficient, or accepted in your area, and nothing here confirms that a listing meets local law. Holding the right documents, and checking what your area requires, stays with you.

## **Adding a document**
1. Click on the Compliance setting on the left panel of your Upliting calendar
2. Click **Add a record**.
3. Drop the file in, or click **Fill document manually** to type the details instead. Files can be PDF, JPEG, PNG, WebP or TIFF, up to 20 MB.
4. Choose which document you are uploading.
5. Check every field. Uplisting labels where each value came from; see the image below.
6. Fill in anything marked "**Not found**".
7. Click **Add record**.

   ![](https://storage.crisp.chat/users/helpdesk/website/-/1/b/e/b/1beb313cc044d100/image_1o5gshe.png)

When Uplisting reads a document you have uploaded via the Compliance setting, it labels each field so you can see what to review:
| **Label** | **Meaning** |
| ---- | ---- |
| Read from document | We found it. The line we read it from is shown under the field |
| Worked out from the issue date | We calculated it rather than read it |
| Please check | We found something but are not confident |
| Not found — please fill this in | We could not find it |
| Not stated — leave it blank if the document has none | The document does not have one |
| Your entry | You typed or changed it |

If the document cannot be read, Uplisting says why: e.g., an unsupported file type, or no text found, where a clearer scan or photo usually works. To ype the details in by hand and the record counts as filed exactly as a scanned one does.

| 💡**Tip: you can only file against listings you can edit.** The vault shows every listing you can see, but the Property dropdown only shows listings you can change. If a listing is missing, that’s why.

## **What a record holds**
| **Field** | **Required** |
| ---- | ---- |
| Property | Yes |
| Document type | Yes |
| Issue date | Yes |
| Expiry date | No. Leave it blank for a document that does not expire |
| Reference | Yes. The certificate or licence number on the document |
| Issuer | No. The engineer or body that issued it |
| File | No |

The **Document type** dropdown covers the records a short-term let usually has to hold: safety and inspection certificates, energy and appliance reports, licences and permits, a TV Licence, insurance, and agreements including a rent-to-rent head lease. There is an **Other** option for anything else. The dropdown is the current list.
## **The vault list**
Each row represents one listing, showing its location and the number of documents that are valid, expiring soon, expired, or missing. A banner at the top shows the number of listings that require attention because of expired or missing documents.

![](https://storage.crisp.chat/users/helpdesk/website/-/1/b/e/b/1beb313cc044d100/image_1g3mdz3.png)

You can search by the listing name, its city or its country. 
You can filter by **Country**, **Region** and **Postcode**. The postcode filter matches the start of a postcode, so EH covers all of Edinburgh.

## **A listing's page**
You can click on a listing to see its requirements and everything filed against it.

![](https://storage.crisp.chat/users/helpdesk/website/-/1/b/e/b/1beb313cc044d100/image_e3aw0r.png)

| **Status** | **Meaning** |
| ---- | ---- |
| Held | On file and in date |
| Expires soon | Expires within 30 days |
| Expired | Past its expiry date |
| Not provided | The requirement has nothing filed against it |
| Marked not applicable | You have told us it does not apply |
| Replaced | Another document of the same type on this listing runs longer |
| Archived | Taken out of the counts by hand, and restorable |

| 💡 **Tip: "Replaced" goes by which document runs longest, not by which you filed last.** If you file a renewal whose expiry date is earlier than the one already on file, the older record keeps standing as the evidence and the new one is marked Replaced. A document with no expiry date outranks every dated one. Check the dates if a record you have just added reads Replaced. 

## **Requirements**
A listing whose address country is set to **United Kingdom** shows the UK-wide requirements we track, which today are a fire risk assessment, a gas safety record (CP12), insurance appropriate to short-term letting and a TV Licence. 
A listing with any other country, or no country on its address, shows none yet, and you can still file and track documents against it.
Each requirement has a plain-English description of the obligation, the date we last reviewed its wording, and **Sources**, naming the laws or guidance it comes from with a link to each.

| ⚠️ **Important: this is a starting checklist, not a complete one.** The requirements we show are UK-wide. They do not cover what your council, nation or building may also require. Insurance is on the list because letting short-term usually requires cover your normal policy does not give, which is a commercial point rather than a legal one, and its sources are guidance rather than legislation.

## **Marking a requirement as not applicable**
If a requirement does not apply, for example, a gas record on a flat with no gas:
1. Open the requirement with **More details**.
2. Choose **Mark as not applicable**.
3. Say why. We record what you tell us without checking it.
4. Confirm.
The requirement's status then reads **Marked not applicable**. The row itself is no longer clickable, so to see who marked it, when and why, or to **Undo** it, use **More details**.

## **Renewing a document**
On the listing's page, a document that is expiring or expired has a **Renew** button. A document that is simply Held does not.
Renew opens the same drop-or-type screen with the property, type, issuer and reference already filled from the record you are replacing, and both dates blank. Note that if you then scan a file, what the scan reads replaces those pre-filled values.
Once the new record is saved, whichever of the two documents runs longer stands as the evidence and the other is marked **Replaced**. Both stay on file.

![](https://storage.crisp.chat/users/helpdesk/website/-/1/b/e/b/1beb313cc044d100/image_19eexbx.png)
## **Archiving and restoring**
**Archive** takes a document out of a listing's counts and stops it from standing as the evidence for a requirement. It stays on file, and you can **Restore** it at any time.

## **FAQs**
**Will you remind me before a certificate expires?** 
Yes. We remind you before a document runs out, and the **Expiring** column shows everything expiring within the next 30 days.

**Can I stop some of my team seeing certificates?**
Yes. Compliance access is a permission like any other: change it for a whole role on the **Roles** tab in **Team Hub**, or for one person on their own Permissions tab.

**My listing is outside the UK and shows no requirements.** 
The requirements we track are UK-wide so far. You can still file and track any document against any listing.

**Who filed this?** 
Each document shows who filed it and who archived it, with the date.